Article UB-GC-005-OR

Turn the cap. The last two letters are the colour.

Crossbar fuel cap New

One bar. One word. Turn it like a key.

A single bar runs across the face with the wordmark on top. The flat sides give the fingers something to push against. Nothing else on it.

Fits Can-Am · Ski-Doo · Lynx

Specs
Marking
Wordmark on the bar
Material
CNC-machined AL6061 billet
Finish
Hard anodized, rough matte
Internals
005: BRP, NBR seal · 006: genuine CFMOTO
More
Fitment, numbers and answers

Article UB-GC-003-BL

Five Wedge fuel cap, blue

Five wedges.

One badger.

Five Wedge fuel cap New

Five wedges, one badger. The grip is in the shape.

Five raised wedges stand around the face, with the honey badger in the middle. Something to grab with a glove on, and something to look at when it is fitted.

Fits Can-Am · Ski-Doo · Lynx

Specs
Marking
Honey badger on the face
Material
CNC-machined AL6061 billet
Finish
Hard anodized, rough matte
Internals
003: BRP, NBR seal · 004: genuine CFMOTO
More
Fitment, numbers and answers

Pick a panel.

Classic fuel cap

The first one. Grip all the way round, the badger sunk into the face.

Your stock cap is plastic with a foam ring. This is 6061 billet with an NBR seal. The upgrade is obvious.

Fits Can-Am · Ski-Doo · Lynx

Specs
Marking
Honey badger on the face
Material
CNC-machined AL6061 billet
Finish
Hard anodized, rough matte
Internals
001: BRP, NBR seal · 002: genuine CFMOTO
More
Fitment, numbers and answers
Classic fuel cap, black
Exhibit A UB-GC-001-BK

You get it back in metal. Choose:

Airbox lid

The stock lid flexes. This one does not.

Machined from solid and fitted in the stock location. Nothing is cut, drilled or adapted. The only thing that changes is what the lid is made of.

Fits Can-Am Outlander · Renegade G2, 2012–2024

Round airbox only. Does not fit the G3 platform.

Specs
Tightening
19 mm hex, takes a standard socket
Seal
Silicone gasket
Marking
Laser-etched wordmark
Finish
Hard anodized, rough matte
Check first
Round airbox only. Does not fit the G3 platform.
More
Fitment, numbers and answers
Airbox lid, gunmetal
  • 19 mm hexTakes a standard socket.
  • Silicone gasketSeals where the stock lid sat.
  • Etched, not printedThe wordmark is in the metal.

UB-AL-001-GM

Grab a pen.

Shifter, red

UB-SH-001RD

Shift.

Shifter

The thread is the fitment.

If a machine runs an M8 shift lever, this replaces the handle. It replaces a plastic handle that was never meant to be gripped hard. Finger-contoured, cut from solid aluminium.

Fits Any M8 shift lever

Common on Can-Am G2 Outlander, Renegade, Commander and Maverick, CFMOTO CFORCE and Kawasaki. Check the lever thread before ordering.

Specs
Thread
M8
Grip
Finger-contoured
Marking
Laser-etched wordmark
Finish
Rough matte
Check first
Common on Can-Am G2 Outlander, Renegade, Commander and Maverick, CFMOTO CFORCE and Kawasaki. Check the lever thread before ordering.
More
Fitment, numbers and answers

UB-BC-001-OR

Brake reservoir cap, orange

Brake reservoir cap

The badger is laser-etched, not printed.

It cannot wear off, because it is not on the part. It is in it. Two screws, stainless steel, in the box.

Fits Can-Am Outlander · Renegade, 2012 on · most Ski-Doo and Lynx

It replaces a rectangular two-screw cap. Compare the shape and the screw spacing with your reservoir before ordering.

Specs
Mounting
Two screws, stainless steel, included
Marking
Laser-etched badger and wordmark
Material
CNC-machined AL6061
Finish
Hard anodized, rough matte
Check first
It replaces a rectangular two-screw cap. Compare the shape and the screw spacing with your reservoir before ordering.
More
Fitment, numbers and answers

Find your machine.
Then the part.

Model years as confirmed for each article. The shifter fits by thread, not by model: the machines listed run an M8 lever. Colour never changes the fitment.

MachineFuel cap · BRP001 · 003 · 005Fuel cap · CFMOTO002 · 004 · 006Airbox lidUB-AL-001ShifterUB-SH-001Brake capUB-BC-001
Can-Am OutlanderATV2012–2026—G2 · 2012–2024G2 · M82012 on
Can-Am RenegadeATV2012–2026—G2 · 2012–2024G2 · M82012 on
Can-Am CommanderUTV2012–2026——M8—
Can-Am MaverickUTV2012–2026——M8—
Can-Am DefenderUTV2012–2026————
Ski-Doo · LynxSnowmobileBy model———Most models
CFMOTO CFORCEATV—2013–2026—M8—
CFMOTO UFORCE · ZFORCEUTV—2013–2026———
Segway Snarler · Villain · Fugleman · UTATV · UTV—2013–2026———
KawasakiM8 shift lever———M8—

On Ski-Doo and Lynx, fitment goes by model, not by year. Fuel caps are not compatible with Aspen or race-grade fuels containing toluene or aggressive solvents. Pump fuel and ethanol blends up to E10 are fine.

Every part.
Every colour.

The article number is the part followed by the colour. UB-SH-001-RD is the shifter in red. Pick a number to see it.

Take this number to Lionparts.

UB-GC-005-OR

Crossbar fuel cap, orange

UNBEHAVED is sold by Lionparts. Nothing is sold on this page. Pick another part or colour above and the number here follows.

Old number on the box?

Since August 2026 one scheme covers the range. Same parts, same specification, new numbers.

LPGC01
UB-GC-001, fuel cap
LPGC02
UB-GC-002, fuel cap
331120
UB-AL-001, airbox lid
335010 · 651050
UB-SH-001, shifter

Not sure?

Send the model, the year or a photo of the part you want to replace. We answer which article fits.

contact@lionparts-europe.com

Every part on one sheet

By machine

Carry the badger

Dealers buy through the Lionparts dealer programme.

Apply, EuropeApply, USA